Datasheet

23.8.9 Data Input Value
Name: IN
Offset: 0x20
Reset: 0x00000000
Property: -
Tip: The I/O pins are assembled in pin groups (”PORT groups”) with up to 32 pins. Group 0
consists of the PA pins, group 1 is for the PB pins, etc. Each pin group has its own PORT
registers, with a 0x80 address spacing. For example, the register address offset for the Data
Direction (DIR) register for group 0 (PA00 to PA31) is 0x00, and the register address offset for
the DIR register for group 1 (PB00 to PB31) is 0x80.
Bit 31 30 29 28 27 26 25 24
IN[31:24]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
IN[23:16]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
IN[15:8]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
IN[7:0]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bits 31:0 – IN[31:0] PORT Data Input Value
These bits are cleared when the corresponding I/O pin input sampler detects a logical low level on the
input pin.
These bits are set when the corresponding I/O pin input sampler detects a logical high level on the input
pin.
SAM D21 Family
PORT - I/O Pin Controller
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 428