Datasheet

22.8.6 Interrupt Flag Status and Clear
Name: INTFLAG
Offset: 0x14
Reset: 0x00
Property: –
Bit 7 6 5 4 3 2 1 0
ERROR READY
Access
R/W R
Reset 0 0
Bit 1 – ERROR Error
This flag is set on the occurrence of an NVME, LOCKE or PROGE error.
This bit can be cleared by writing a '1' to its bit location.
Value Description
0
No errors have been received since the last clear.
1
At least one error has occurred since the last clear.
Bit 0 – READY NVM Ready
Value Description
0
The NVM controller is busy programming or erasing.
1
The NVM controller is ready to accept a new command.
SAM D21 Family
NVMCTRL – Nonvolatile Memory Controller
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 401