Datasheet

...........continued
Symbol Parameter Conditions Min. Typ. Max. Units
I
FDPLL96M
Current consumption fIN= 32 kHz, fOUT= 48 MHz - 500 700 µA
fIN= 32 kHz, fOUT= 64 MHz - 900 1200
J
P
Period jitter peak fIN= 32 kHz, fOUT= 48 MHz - 1.5 4 %
fIN= 32 kHz, fOUT= 64 MHz - 2.8 7
fIN= 2 MHz, fOUT= 48 MHz - 1.3 5
fIN= 2 MHz, fOUT= 64 MHz - 3.3 8
t
LOCK
Lock Time After startup, time to get lock signal.
fIN= 32 kHz, fOUT= 64 MHz
- 1.3 2 ms
After startup, time to get lock signal
fIN= 2MHz, fOUT= 64MHz
- 25 50 µs
Duty Duty cycle - 40 50 60 %
Table 40-59. FDPLL96M Characteristics
(1)
(Device Variant B and D)
Symbol Parameter Conditions Min. Typ. Max. Units
f
IN
Input frequency - 32 - 2000 kHz
f
OUT
Output frequency - 48 - 96 MHz
I
FDPLL96M
Current consumption fIN= 32 kHz, fOUT= 48 MHz - 500 740 µA
fIN= 32 kHz, fOUT= 96 MHz - 900 1262
J
P
Period jitter peak fIN= 32 kHz, fOUT= 48 MHz - 2.1 4 %
fIN= 32 kHz, fOUT= 96 MHz - 3.8 11
fIN= 2 MHz, fOUT= 48 MHz - 2.2 4
fIN= 2 MHz, fOUT= 96 MHz - 5 12
t
LOCK
Lock Time After startup, time to get lock signal.
fIN= 32 kHz, fOUT= 96 MHz
- 1.2 2 ms
fIN= 2 MHz, fOUT= 96 MHz - 25 50 µs
Duty Duty cycle - 40 50 60 %
Note:
1. All values have been characterized with FILTSEL[1/0] as default value.
40.12 PTC Characteristics
The values given in the Power Consumption table below are measured values of power consumption,
which are valid under the following conditions:
SAM D21 Family
AEC-Q100 125°C Specifications
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 1134