Datasheet

...........continued
Symbol Description Max. Units
f
GCLK_EVSYS_CHANNEL_10
EVSYS channel 10 input clock frequency 48 MHz
f
GCLK_EVSYS_CHANNEL_11
EVSYS channel 11 input clock frequency 48 MHz
f
GCLK_SERCOMx_SLOW
Common SERCOM slow input clock frequency 48 MHz
f
GCLK_SERCOM0_CORE
SERCOM0 input clock frequency 48 MHz
f
GCLK_SERCOM1_CORE
SERCOM1 input clock frequency 48 MHz
f
GCLK_SERCOM2_CORE
SERCOM2 input clock frequency 48 MHz
f
GCLK_SERCOM3_CORE
SERCOM3 input clock frequency 48 MHz
f
GCLK_SERCOM4_CORE
SERCOM4 input clock frequency 48 MHz
f
GCLK_SERCOM5_CORE
SERCOM5 input clock frequency 48 MHz
f
GCLK_TCC0, GCLK_TCC1
TCC0, TCC1 input clock frequency 96 MHz
f
GCLK_TCC2
,f
GCLK_TCC3
,
GCLK_TC3
TCC2, TCC3, TC3 input clock frequency 96 MHz
f
GCLK_TC4, GCLK_TC5
TC4, TC5 input clock frequency 48 MHz
f
GCLK_TC6, GCLK_TC7
TC6,TC7 input clock frequency 48 MHz
f
GCLK_ADC
ADC input clock frequency 48 MHz
f
GCLK_AC_DIG
AC digital input clock frequency 48 MHz
f
GCLK_AC_ANA
AC analog input clock frequency 64 kHz
f
GCLK_DAC
DAC input clock frequency 350 kHz
f
GCLK_PTC
PTC input clock frequency 48 MHz
f
GCLK_I2S_0
I
2
S serial 0 input clock frequency 13 MHz
f
GCLK_I2S_1
I
2
S serial 1 input clock frequency 13 MHz
40.7 Power Consumption
The values provided in the following table are measured values of power consumption, which are valid
under the following conditions, except where noted:
• Operating conditions:
– VDDIN = 3.3V
• Wake up time from Sleep mode is measured from the edge of the wakeup signal to the execution of
the first instruction fetched in Flash.
• Oscillators:
– XOSC (Crystal scillator) stopped
– XOSC32K (32 kHz Crystal Oscillator) running with external 32 kHz crystal
– DFLL48M using XOSC32K as reference and running at 48 MHz
• Clocks:
– DFLL48M used as main clock source, except otherwise specified.
SAM D21 Family
AEC-Q100 125°C Specifications
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 1104