Datasheet

indicated in the operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Table 40-2. Absolute Maximum Ratings
Symbol Description Conditions Min. Max. Units
VDD Power Supply Voltage 0 3.8 V
IVDD Current into a VDD pin - 28
(1)
mA
IGND Current out of a GND pin - 39
(1)
mA
VPIN Pin voltage with respect to GND and VDD GND-0.3V VDD+0.3V V
TSTORAGE Storage temperature -60 150 °C
Note:
1. Maximum source current is 14mA and maximum sink current is 19.5mA per cluster. A cluster is a
group of GPIOs, see related links. Also note that each VDD/GND pair is connected to 2 clusters so
current consumption through the pair will be a sum of the clusters source/sink currents.
Related Links
GPIO Clusters
40.4 General Operating Ratings
The device must operate within the ratings listed in the following table in order for all other electrical
characteristics and typical characteristics of the device to be valid.
Table 40-3. General Operating Conditions
Symbol Description Conditions Min. Typ. Max. Units
VDD Power Supply Voltage 2.7 3.3 3.63 V
VDDANA Analog supply voltage 2.7 3.3 3.63 V
TA Temperature range -40 25 125 °C
TJ Junction Temperature - - 145 °C
40.5 Supply Characteristics
The following characteristics are applicable to the operating temperature range: TA = -40°C to 125°C,
unless otherwise specified and are valid for a junction temperature up to TJ = 145°C.
Table 40-4. Supply Characteristics
Symbol Conditions Voltage Units
Min Max
V
DDIO
Full Voltage Range 2.7 3.63 VV
DDIN
V
DDANA
SAM D21 Family
AEC-Q100 125°C Specifications
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 1100