Datasheet

955
SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
37.14.12 HSMCI Status Register
Name: HSMCI_SR
Address: 0x40000040
Access: Read-only
• CMDRDY: Command Ready
0: A command is in progress.
1: The last command has been sent. Cleared when writing in the HSMCI_CMDR.
• RXRDY: Receiver Ready
0: Data has not yet been received since the last read of HSMCI_RDR.
1: Data has been received since the last read of HSMCI_RDR.
• TXRDY: Transmit Ready
0: The last data written in HSMCI_TDR has not yet been transferred in the Shift Register.
1: The last data written in HSMCI_TDR has been transferred in the Shift Register.
• BLKE: Data Block Ended
This flag must be used only for Write Operations.
0: A data block transfer is not yet finished. Cleared when reading the HSMCI_SR.
1: A data block transfer has ended, including the CRC16 Status transmission.
the flag is set for each transmitted CRC Status.
Refer to the MMC or SD Specification for more details concerning the CRC Status.
• DTIP: Data Transfer in Progress
0: No data transfer in progress.
1: The current data transfer is still in progress, including CRC16 calculation. Cleared at the end of the CRC16 calculation.
31 30 29 28 27 26 25 24
UNRE OVRE ACKRCVE ACKRCV XFRDONE FIFOEMPTY DMADONE BLKOVRE
23 22 21 20 19 18 17 16
CSTOE DTOE DCRCE RTOE RENDE RCRCE RDIRE RINDE
15 14 13 12 11 10 9 8
– – CSRCV SDIOWAIT – –
SDIO IRQ for
Slot B
SDIO IRQ for
Slot A
76543210
– – NOTBUSY DTIP BLKE TXRDY RXRDY CMDRDY