Datasheet

549
SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
28.15.10 PMC Clock Generator PLLA Register
Name: CKGR_PLLAR
Address: 0x400E0628
Access: Read-write
Possible limitations on PLLA input frequencies and multiplier factors should be checked before using the PMC.
Warning:
Bit 29 must always be set to 1 when programming the CKGR_PLLAR register.
This register can only be written if the WPEN bit is cleared in “PMC Write Protect Mode Register” .
• DIVA: Divider
• PLLACOUNT: PLLA Counter
Specifies the number of Slow Clock cycles x8 before the LOCKA bit is set in PMC_SR after CKGR_PLLAR is written.
• MULA: PLLA Multiplier
0 = The PLLA is deactivated.
1 up to 2047 = The PLLA Clock frequency is the PLLA input frequency multiplied by MULA + 1.
• ONE: Must Be Set to 1
Bit 29 must always be set to 1 when programming the CKGR_PLLAR register.
31 30 29 28 27 26 25 24
––ONE–– MULA
23 22 21 20 19 18 17 16
MULA
15 14 13 12 11 10 9 8
– – PLLACOUNT
76543210
DIVA
DIVA Divider Selected
0 Divider output is 0
1 Divider is bypassed (DIVA=1)
2 - 255 Divider output is DIVA