Datasheet

SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
546
28.15.8 PMC Clock Generator Main Oscillator Register
Name: CKGR_MOR
Address: 0x400E0620
Access: Read-write
This register can only be written if the WPEN bit is cleared in “PMC Write Protect Mode Register” .
• KEY: Password
Should be written at value 0x37. Writing any other value in this field aborts the write operation.
• MOSCXTEN: Main Crystal Oscillator Enable
A crystal must be connected between XIN and XOUT.
0 = The Main Crystal Oscillator is disabled.
1 = The Main Crystal Oscillator is enabled. MOSCXTBY must be set to 0.
When MOSCXTEN is set, the MOSCXTS flag is set once the Main Crystal Oscillator startup time is achieved.
• MOSCXTBY: Main Crystal Oscillator Bypass
0 = No effect.
1 = The Main Crystal Oscillator is bypassed. MOSCXTEN must be set to 0. An external clock must be connected on XIN.
When MOSCXTBY is set, the MOSCXTS flag in PMC_SR is automatically set.
Clearing MOSCXTEN and MOSCXTBY bits allows resetting the MOSCXTS flag.
• MOSCRCEN: Main On-Chip RC Oscillator Enable
0 = The Main On-Chip RC Oscillator is disabled.
1 = The Main On-Chip RC Oscillator is enabled.
When MOSCRCEN is set, the MOSCRCS flag is set once the Main On-Chip RC Oscillator startup time is achieved.
• MOSCRCF: Main On-Chip RC Oscillator Frequency Selection
At start-up, the Main On-Chip RC Oscillator frequency is 4 MHz.
31 30 29 28 27 26 25 24
––––––CFDENMOSCSEL
23 22 21 20 19 18 17 16
KEY
15 14 13 12 11 10 9 8
MOSCXTST
76543210
– MOSCRCF MOSCRCEN – MOSCXTBY MOSCXTEN
Value Name Description
0x0 4_MHz The Fast RC Oscillator Frequency is at 4 MHz (default)
0x1 8_MHz The Fast RC Oscillator Frequency is at 8 MHz
0x2 12_MHz The Fast RC Oscillator Frequency is at 12 MHz