Datasheet

SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
480
• MULERR1: Multiple Error in the page between the 256th and the 511th bytes or between the 512nd and the
1023rd bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Multiple Errors Detected.
1: Multiple Errors Detected.
• RECERR2: Recoverable Error in the page between the 512nd and the 767th bytes or between the 1024th and the
1535th bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Errors Detected.
1: Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise, multiple uncorrected errors
were detected.
• ECCERR2: ECC Error in the page between the 512nd and the 767th bytes or between the 1024th and the 1535th
bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Errors Detected.
1: A single bit error occurred in the ECC bytes.
Read ECC Parity 2 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR2: Multiple Error in the page between the 512nd and the 767th bytes or between the 1024th and the
1535th bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Multiple Errors Detected.
1: Multiple Errors Detected.
• RECERR3: Recoverable Error in the page between the 768th and the 1023rd bytes or between the 1536th and
the 2047th bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Errors Detected.
1: Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected.
• ECCERR3: ECC Error in the page between the 768th and the 1023rd bytes or between the 1536th and the 2047th
bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Errors Detected.
1: A single bit error occurred in the ECC bytes.
Read ECC Parity 3 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR3: Multiple Error in the page between the 768th and the 1023rd bytes or between the 1536th and the
2047th bytes
Fixed to 0 if
TYPECORREC = 0.
0: No Multiple Errors Detected.
1: Multiple Errors Detected.