Datasheet
SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
460
25.16.5.1 Page Read
Figure 25-37. Page Read Flow Chart
Note that instead of using the interrupt one can poll the NFCBUSY Flag.
For more information on the NFC Control Register, see Section 25.16.2.2 ”NFC Address Command”.
Congure Device,
writing in theUser Interface
Write the NFC
Command registers
Enable XFRDONE
interrupt (SMC_IER)
Wait for Interrupt
Copy the data from NFC
SRAM to application
memory (via DMA for example)
Using NFC
Check Error
Correcting Codes