Datasheet

SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
378
22.7.18 DMAC Channel x [x = 0..5] Configuration Register
Name: DMAC_CFGx [x = 0..5]
Address: 0x400C4050 [0], 0x400C4078 [1], 0x400C40A0 [2], 0x400C40C8 [3], 0x400C40F0 [4], 0x400C4118 [5]
Access: Read-write
Reset: 0x0100000000
This register can only be written if the WPEN bit is cleared in “DMAC Write Protect Mode Register” on page 380
• SRC_PER: Source with Peripheral identifier
Channel x Source Request is associated with peripheral identifier coded SRC_PER handshaking interface.
• DST_PER: Destination with Peripheral identifier
Channel x Destination Request is associated with peripheral identifier coded DST_PER handshaking interface.
• SRC_H2SEL: Software or Hardware Selection for the Source
0 (SW): Software handshaking interface is used to trigger a transfer request.
1 (HW): Hardware handshaking interface is used to trigger a transfer request.
• DST_H2SEL: Software or Hardware Selection for the Destination
0 (SW): Software handshaking interface is used to trigger a transfer request.
1 (HW): Hardware handshaking interface is used to trigger a transfer request.
• SOD: Stop On Done
0 (DISABLE): STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.
1 (ENABLE): STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.
• LOCK_IF: Interface Lock
0 (DISABLE): Interface Lock capability is disabled
1 (ENABLE): Interface Lock capability is enabled
• LOCK_B: Bus Lock
0 (DISABLE): AHB Bus Locking capability is disabled.
1(ENABLE): AHB Bus Locking capability is enabled.
31 30 29 28 27 26 25 24
– – FIFOCFG – AHB_PROT
23 22 21 20 19 18 17 16
– LOCK_IF_L LOCK_B LOCK_IF – – – SOD
15 14 13 12 11 10 9 8
– – DST_H2SEL – – – SRC_H2SEL –
76543210
DST_PER SRC_PER