Datasheet

SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
202
10.23.3 MPU Region Number Register
The RNR selects which memory region is referenced by the RBAR and RASR registers. See the register summary
in Table 10-35 on page 198 for its attributes. The bit assignments are:
•REGION
Indicates the MPU region referenced by the RBAR and RASR registers.
The MPU supports 8 memory regions, so the permitted values of this field are 0-7.
Normally, you write the required region number to this register before accessing the RBAR or RASR. However you can
change the region number by writing to the RBAR with the VALID bit set to 1, see “MPU Region Base Address Register” on
page 203. This write updates the value of the REGION field.
31 302928 27 26 25 24
Reserved
23 22 21 20 19 18 17 16
Reserved
15 14 13 12 11 10 9 8
Reserved
76543 210
REGION