Datasheet

1135
SAM3X / SAM3A [DATASHEET]
Atmel-11057C-ATARM-SAM3X-SAM3A-Datasheet_23-Mar-15
• HBISOFLUSHES: High Bandwidth Isochronous IN Flush Interrupt Enable
Writing a one to this bit will set HBISOFLUSHE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• NAKOUTES: NAKed OUT Interrupt Enable
Writing a one to this bit will set NAKOUTE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• HBISOINERRES: High Bandwidth Isochronous IN Error Interrupt Enable
Writing a one to this bit will set HBISOINERRE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• RXSTPES: Received SETUP Interrupt Enable
Writing a one to this bit will set RXSTPE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• UNDERFES: Underflow Interrupt Enable
Writing a one to this bit will set UNDERFE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• RXOUTES: Received OUT Data Interrupt Enable
Writing a one to this bit will set RXOUTE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.
• TXINES: Transmitted IN Data Interrupt Enable
Writing a one to this bit will set TXINE bit in UOTGHS_DEVEPTIMRx.
Writing a zero to this bit has no effect.
This bit always reads as zero.