Datasheet

22.11.3 OCR2 – Output Compare Register
Name: OCR2
Offset: 0x23 [ID-00000312]
Reset: 0x00
Property: When addressing I/O Registers as data space the offset address is 0x43
When using the I/O specific commands IN and OUT, the I/O addresses 0x00 - 0x3F must be used. When
addressing I/O Registers as data space using LD and ST instructions, 0x20 must be added to these offset
addresses.
The Output Compare Register contains an 8-bit value that is continuously compared with the counter
value (TCNT2). A match can be used to generate an Output Compare interrupt, or to generate a
waveform output on the OC2 pin.
Bit 7 6 5 4 3 2 1 0
OCR2[7:0]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 7:0 – OCR2[7:0]
AVR 8-Bit Microcontroller
8-bit Timer/Counter2 with PWM and Asynchronous Ope...
© 2017 Microchip Technology Inc.
Datasheet Complete
40001974A-page 168