Datasheet
18.4.10 PIND – The Port D Input Pins Address
Name: PIND
Offset: 0x10
Reset: N/A
Property: When addressing I/O Registers as data space the offset address is 0x30
When using the I/O specific commands IN and OUT, the I/O addresses 0x00 - 0x3F must be used. When
addressing I/O Registers as data space using LD and ST instructions, 0x20 must be added to these offset
addresses.
Bit 7 6 5 4 3 2 1 0
PINDn[7:0]
Access
R R R R R R R R
Reset x x x x x x x x
Bits 7:0 – PINDn[7:0] Port D Input Pins Address [n = 7:0]
AVR 8-Bit Microcontroller
I/O Ports
© 2017 Microchip Technology Inc.
Datasheet Complete
40001974A-page 103