Datasheet

40. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The referring
revision in this section refers to the document revision.
40.1. 8160E - 07/2015
1. New workflow used for the publication.
40.2. 8160D - 02/2013
1. Applied the new template that includes new logo and new last page.
2. Added Capacitive Touch Sensing on page 21.
3. Note is added Performing Page Erase by SPM on page 373.
4. Note 6 and Note 7 below Table 32-6 Two-wire Serial Bus Requirements on page 419 have been
removed.
5. Formulas in Table 32-6 Two-wire Serial Bus Requirements on page 419 have been updated.
6. Added Electrical Characteristics – TA = -40°C to 105°C on page 433.
7. Added Typical Characteristics – TA = -40°C to 105°C on page 466.
8. Updated Ordering Information on page 11 and added Ordering Information for 105°C devices.
40.3. 8160C - 07/2009
1. Updated Errata on page 502.
40.4. 8160B - 03/2009
1. Updated Typical Characteristics – TA = -40°C to 85°C on page 436 view.
2. Updated Figure 34-36 BOD Thresholds vs. Temperature (BODLEVEL is 4.0V) on page 454 and
Figure 34-37 BOD Thresholds vs. Temperature (BODLEVEL is 2.7V) on page 454 (BOD
Thresholds Characteristics).
3. Updated the last page.
40.5. 8160A - 08/2008
1. Initial revision (Based on the ATmega64/L datasheet 2490N-AVR-06/08).
2. Changes done compared to ATmega64/L datasheet 2490N-AVR-06/08:
– All Electrical Characteristics are moved to Electrical Characteristics – TA = -40°C to 85°C on
page 415.
– Register descriptions are moved to sub section at the end of each chapter.
– Updated DC Characteristics on page 415 with new V
OL
Max (0.9V and 0.6V) and typical
values for I
CC
.
– Added Speed Grades on page 417.
– Added System and Reset Characteristics on page 418.
– New graphics in Electrical Characteristics – TA = -40°C to 85°C on page 415.
– New Ordering Information on page 11.
Atmel ATmega64A [DATASHEET]
Atmel-8160E-ATmega64A_Datasheet_Complete-09/2015
504