Datasheet

325
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
36. Revision History
Please note that the following page numbers referred to in this section refer to the specific revision mentioned, not to this
document.
Revision No. History
9223F-AVR-04/14 Put datasheet in the latest templage
9223E-AVR-02/13 Table 28-8 “Device ID” on page 297 updated
9223D-AVR-05/12 Set datasheet from “Preliminary” to “Standard”
9223C-AVR-02/12
Features on page 1 updated
Figure 25-1 “The debugWIRE Setup” on page 267 updated
Section 28.8 “Serial Downloading” on page 309 updated
Section 29.2 “DC Characteristics” on pages 315 to 316 updated
Section 29.3 “Speed Grades” on page 316 updated
Section 29.4 “Clock Characteristics” on page 317 updated
Section 29.5 “System and Reset Characteristics” on page 318 updated
Section 29.8 “ADC Characteristics” on page 322 updated
Section 30.1.5 “I/O Pin Output Voltage versus Sink Current (V
CC
= 1.8V)” on pages 329
to 330 updated
Section 30.2.6 “Pin Driver Strength” on pages 340 to 341 updated
Section 30.3.6 “Pin Driver Strength” on pages 350 to 351 updated
Section 33 “Ordering Information” on page 365 updated
9223B-AVR-09/11
ADC characteristics updated
Temperature sensor updated
9223A-AVR-08/11
Creation of the automotive version starting from industrial version based on the Atmel
ATmega48PA/88PA/168PA datasheet 8271C-AVR-08/10. Temperature and voltage
ranges reflecting automotive requirements.