Datasheet

309
ATmega16U4/32U4 [DATASHEET]
Atmel-7766J-USB-ATmega16U4/32U4-Datasheet_04/2016
Figure 24-13. Integral Non-linearity (INL)
 Differential Non-linearity (DNL): The maximum deviation of the actual code width (the interval between
two adjacent transitions) from the ideal code width (1 LSB). Ideal value: 0 LSB.
Figure 24-14. Differential Non-linearity (DNL)
 Quantization Error: Due to the quantization of the input voltage into a finite number of codes, a range of
input voltages (1 LSB wide) will code to the same value. Always ±0.5 LSB.
 Absolute Accuracy: The maximum deviation of an actual (unadjusted) transition compared to an ideal
transition for any code. This is the compound effect of offset, gain error, differential error, non-linearity, and
quantization error. Ideal value: ±0.5 LSB.
24.8 ADC Conversion Result
After the conversion is complete (ADIF is high), the conversion result can be found in the ADC Result Registers
(ADCL, ADCH).
For single ended conversion, the result is:
Output Code
V
REF
Input Voltage
Ideal ADC
Actual ADC
INL
Output Code
0x3FF
0x000
0
V
REF
Input Voltage
DNL
1 LSB