Datasheet

26.6.1. debugWire Data Register
When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be
used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an
I/O address offset within 0x00 - 0x3F.
Name: DWDR
Offset: 0x51
Reset: 0x00
Property: When addressing as I/O Register: address offset is 0x31
Bit 7 6 5 4 3 2 1 0
DWDR[7:0]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 7:0 – DWDR[7:0]: debugWire Data
The DWDR Register provides a communication channel from the running program in the MCU to the
debugger. This register is only accessible by the debugWIRE and can therefore not be used as a general
purpose register in the normal operations.
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
355