Datasheet

22.11.7. Digital Input Disable Register 1
When the respective bits are written to logic one, the digital input buffer on the corresponding ADC pin is
disabled. The corresponding PIN Register bit will always read as zero when this bit is set. When an
analog signal is applied to an analog pin and the digital input from this pin is not needed, this bit should
be written logic one to reduce power consumption in the digital input buffer.
Name: DIDR1
Offset: 0x7F
Reset: 0x00
Property: -
Bit 7 6 5 4 3 2 1 0
ADC5D ADC4D ADC3D ADC2D ADC1D ADC0D
Access
R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0
Bits 0, 1, 2, 3, 4, 5 – ADC0D, ADC1D, ADC2D, ADC3D, ADC4D, ADC5D: ADC Digital Input Disable
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
329