Datasheet

21.6.9. LIN Data Buffer Selection Register
Name: LINSEL
Offset: 0xD1
Reset: 0x0
Property: R/W
Bit 7 6 5 4 3 2 1 0
LAINC1 LAINC0 LINDX2 LINDX1 LINDX0
Access
Reset 0 0 0 0 0
Bits 3, 4 – LAINCn: Auto Increment of Data Buffer Index
In LIN mode as in the table below
In UART mode this field is unused.
Value Description
0 Auto incrementation of FIFO data buffer index (default)
1 No auto incrementation
Bits 0, 1, 2 – LINDXn: FIFO LIN Data Buffer Index
In LIN mode: location (index) of the LIN response data byte into the FIFO data buffer. The FIFO data
buffer is accessed through LINDAT.
In UART mode this field is unused.
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
301