Datasheet

Name Description Type width
AC1O Analog Comparator 1 Output Signal
AC2O Analog Comparator 2 Output Signal
Table 18-2. Block Inputs
Name Description Type width
PSCIN0 Input 0 used for fault function Signal
PSCIN1 Input 1 used for fault function Signal
PSCIN2 Input 2 used for fault function Signal
18.8.2. Output description
Table 18-3. Block Outputs
Name Description Type width
PSCOUT0A PSC Module 0 Output A Signal
PSCOUT0B PSC Module 0 Output B Signal
PSCOUT1A PSC Module 1 Output A Signal
PSCOUT1B PSC Module 1 Output B Signal
PSCOUT2A PSC Module 2 Output A Signal
PSCOUT2B PSC Module 2 Output B Signal
Table 18-4. Internal Outputs
Name Description Type width
IRQPSCn PSC interrupt request: two
souces, overflow, fault
Signal
PSCASY ADC synchronization (+ Amplifier
Syncho)
Note: See Analog
synchronization
Signal
18.9. PSC input
For detailed information on the PSC, please refer to Application Note ‘AVR138: ATmega32M1 family PSC
Cookbook’, available on the Atmel web site.
Each module 0, 1 and 2 of PSC has its own system to take into account one PSC input. According to
PSC Module n Input Control Register. See “PMICn – PSC Module n Input Control Register” on page 144.
PSCINn input can act has a Retrigger or Fault input.
Each block A or B is also configured by this PSC Module n Input Control Register (PMICn).
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
194