Datasheet

16.14.8. Timer/Counter 1 Interrupt Mask Register
Name: TIMSK1
Offset: 0x6F
Reset: 0x00
Property: -
Bit 7 6 5 4 3 2 1 0
ICIE OCIEB OCIEA TOIE
Access
R/W R/W R/W R/W
Reset 0 0 0 0
Bit 5 – ICIE: Input Capture Interrupt Enable
When this bit is written to '1', and the I-flag in the Status Register is set (interrupts globally enabled), the
Timer/Counter1 Input Capture interrupt is enabled. The corresponding Interrupt Vector is executed when
the ICF Flag, located in TIFR1, is set.
Bit 2 – OCIEB: Output Compare B Match Interrupt Enable
When this bit is written to '1', and the I-flag in the Status Register is set (interrupts globally enabled), the
Timer/Counter Output Compare B Match interrupt is enabled. The corresponding Interrupt Vector is
executed when the OCFB Flag, located in TIFR1, is set.
Bit 1 – OCIEA: Output Compare A Match Interrupt Enable
When this bit is written to '1', and the I-flag in the Status Register is set (interrupts globally enabled), the
Timer/Counter Output Compare A Match interrupt is enabled. The corresponding Interrupt Vector is
executed when the OCFA Flag, located in TIFR1, is set.
Bit 0 – TOIE: Overflow Interrupt Enable
When this bit is written to '1', and the I-flag in the Status Register is set (interrupts globally enabled), the
Timer/Counter 1 Overflow interrupt is enabled. The corresponding Interrupt Vector is executed when the
TOV Flag, located in TIFR1, is set.
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
181