Datasheet

16.14.1. TC1 Control Register A
Name: TCCR1A
Offset: 0x80
Reset: 0x00
Property: -
Bit 7 6 5 4 3 2 1 0
COM1 COM1 COM1 COM1 WGM11 WGM10
Access
R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0
Bits 4, 5, 6, 7 – COM1, COM1, COM1, COM1: Compare Output Mode for Channel
The COM1A[1:0] and COM1B[1:0] control the Output Compare pins (OC1A and OC1B respectively)
behavior. If one or both of the COM1A[1:0] bits are written to one, the OC1A output overrides the normal
port functionality of the I/O pin it is connected to. If one or both of the COM1B[1:0] bit are written to one,
the OC1B output overrides the normal port functionality of the I/O pin it is connected to. However, note
that the Data Direction Register (DDR) bit corresponding to the OC1A or OC1B pin must be set in order
to enable the output driver.
When the OC1A or OC1B is connected to the pin, the function of the COM1x[1:0] bits is dependent of the
WGM1[3:0] bits setting. The table below shows the COM1x[1:0] bit functionality when the WGM1[3:0] bits
are set to a Normal or a CTC mode (non-PWM).
Table 16-3. Compare Output Mode, non-PWM
COM1A1/COM1B1 COM1A0/COM1B0 Description
0 0 Normal port operation, OC1A/OC1B disconnected.
0 1 Toggle OC1A/OC1B on Compare Match.
1 0 Clear OC1A/OC1B on Compare Match (Set output to low
level).
1 1 Set OC1A/OC1B on Compare Match (Set output to high
level).
The table below shows the COM1x[1:0] bit functionality when the WGM1[3:0] bits are set to the fast PWM
mode.
Table 16-4. Compare Output Mode, Fast PWM
COM1A1/
COM1B1
COM1A0/
COM1B0
Description
0 0 Normal port operation, OC1A/OC1B disconnected.
0 1 WGM1[3:0] = 14 or 15: Toggle OC1A on Compare Match, OC1B
disconnected (normal port operation). For all other WGM1 settings,
normal port operation, OC1A/OC1B disconnected.
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
171