Datasheet

14.4.12. Port E Data Direction Register
When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be
used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an
I/O address offset within 0x00 - 0x3F.
Name: DDRE
Offset: 0x2D
Reset: 0x00
Property: When addressing as I/O Register: address offset is 0x0D
Bit 7 6 5 4 3 2 1 0
DDRE2 DDRE1 DDRE0
Access
R/W R/W R/W
Reset 0 0 0
Bits 0, 1, 2 – DDREn: Port E Data Direction
This bit field selects the data direction for the individual pins in the Port. When a Port is mapped as virtual,
accessing this bit field is identical to accessing the actual DIR register for the Port.
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
124