Datasheet

14.4.11. Port E Data Register
When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be
used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an
I/O address offset within 0x00 - 0x3F.
Name: PORTE
Offset: 0x2E
Reset: 0x00
Property: When addressing as I/O Register: address offset is 0x0E
Bit 7 6 5 4 3 2 1 0
PORTE2 PORTE1 PORTE0
Access
R/W R/W R/W
Reset 0 0 0
Bits 0, 1, 2 – PORTEn: Port E Data [n = 2:0]
Atmel ATmega16M1/32M1/64M1 [DATASHEET]
Atmel-8209F-ATmega16M1/32M1/64M1_Datasheet_Complete-10/2016
123