Datasheet
6
0735U–PLD–7/10
Atmel ATF22V10C(Q)
4.4 Power-down AC Characteristics
(1)(2)(3)
Notes: 1. Output data is latched and held
2. High-Z outputs remain high-Z
3. Clock and input transitions are ignored
4.5 Input Test Waveforms
4.5.1 Input Test Waveforms and Measurement Levels
4.5.2 Commercial Output Test Loads
4.6 Pin Capacitance
Table 4-1. Pin Capacitance (f = 1MHz,T=25C
(1)
)
Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested
Symbol Parameter
-5 -7 -10 -15
UnitsMin Max Min Max Min Max Min Max
t
IVDH
Valid Input before PD High 5.0 7.5 10.0 15.0 ns
t
GVDH
Valid OE before PD High 0 0 0 0 ns
t
CVDH
Valid Clock before PD High 0 0 0 ns
t
DHIX
Input Don’t Care after PD High 5.0 7.0 10.0 15.0 ns
t
DHGX
OE Don’t Care after PD High 5.0 7.0 10.0 15.0 ns
t
DHCX
Clock Don’t Care after PD High 5.0 7.0 10.0 15.0 ns
t
DLIV
PD Low to Valid Input 5.0 7.5 10.0 15.0 ns
t
DLGV
PD Low to Valid OE 15.0 20.0 25.0 30.0 ns
t
DLCV
PD Low to Valid Clock 15.0 20.0 25.0 30.0 ns
t
DLOV
PD Low to Valid Output 20.0 25.0 30.0 35.0 ns
Typ Max Units Conditions
C
IN
5 8 pF V
IN
=0V
C
OUT
6 8 pF V
OUT
=0V