Datasheet

ATF196V8B(Q)(QL) [DATASHEET]
Atmel-0364K-PLD-ATF16V8B-8BQ-8BQL-Datasheet_072014
4
3. Electrical Characteristics
3.1 Absolute Maximum Ratings*
Note: 1. Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20ns. Maximum output
pin voltage is V
CC
+ 0.75V DC, which may overshoot to 7.0V for pulses of less than 20ns.
3.2 Pin Capacitance
Table 3-1. Pin Capacitance (f = 1MHz, T = 25°C
(1)
)
Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
3.3 DC and AC Operating Conditions
Table 3-2. DC and AC Operating Conditions
Temperature Under Bias . . . . . . . . . . . . . . . . . -55
o
C to +125
o
C
Storage Temperature . . . . . . . . . . . . . . . . . . . . -65
o
C to +150
o
C
Voltage on Any Pin with
Respect to Ground . . . . . . . . . . . . . . . . . . . . . . -2.0V to +7.0V
(1)
Voltage on Input Pins with Respect to
Ground During Programming . . . . . . . . . . . . . -2.0V to +14.0V
(1)
Programming Voltage with
Respect to Ground . . . . . . . . . . . . . . . . . . . . . -2.0V to +14.0V
(1)
*Notice: Stresses beyond those listed under
“Absolute Maximum Ratings” may cause
permanent damage to the device. This is
a stress rating only and functional
operation of the device at these or any
other conditions beyond those indicated
in the operational sections of this
specification is not implied. Exposure to
absolute maximum rating conditions for
extended periods may affect device
reliability.
Typ Max Units Conditions
C
IN
5 8 pF V
IN
= 0V
C
OUT
6 8 pF V
OUT
= 0V
Industrial
Operating Temperature (Ambient) -40
o
C to +85
o
C
V
CC
Power Supply 5.0V 10%