Datasheet

859
SAM9G45 [DATASHEET]
Atmel-6438O-ATARM-SAM9G45-Datasheet_08-Dec-15
37.6.4 UDPHS Interrupt Status Register
Name: UDPHS_INTSTA
Address: 0xFFF78014
Access: Read-only
SPEED: Speed Status
0: Reset by hardware when the hardware is in Full Speed mode.
1: Set by hardware when the hardware is in High Speed mode
DET_SUSPD: Suspend Interrupt
0: Cleared by setting the DET_SUSPD bit in UDPHS_CLRINT register
1: Set by hardware when a UDPHS Suspend (Idle bus for three frame periods, a J state for 3 ms) is detected. This triggers
a UDPHS interrupt when the DET_SUSPD bit is set in UDPHS_IEN register.
MICRO_SOF: Micro Start Of Frame Interrupt
0: Cleared by setting the MICRO_SOF bit in UDPHS_CLRINT register.
1: Set by hardware when an UDPHS micro start of frame PID (SOF) has been detected (every 125 µs) or synthesized by
the macro. This triggers a UDPHS interrupt when the MICRO_SOF bit is set in UDPHS_IEN. In case of detected SOF, the
MICRO_FRAME_NUM field in UDPHS_FNUM register is incremented and the FRAME_NUMBER field does not change.
Note: The Micro Start Of Frame Interrupt (MICRO_SOF), and the Start Of Frame Interrupt (INT_SOF) are not generated at the same
time.
INT_SOF: Start Of Frame Interrupt
0: Cleared by setting the INT_SOF bit in UDPHS_CLRINT.
1: Set by hardware when an UDPHS Start Of Frame PID (SOF) has been detected (every 1 ms) or synthesized by the
macro. This triggers a UDPHS interrupt when the INT_SOF bit is set in UDPHS_IEN register. In case of detected SOF, in
High Speed mode, the MICRO_FRAME_NUMBER field is cleared in UDPHS_FNUM register and the FRAME_NUMBER
field is updated.
ENDRESET: End Of Reset Interrupt
0: Cleared by setting the ENDRESET bit in UDPHS_CLRINT.
1: Set by hardware when an End Of Reset has been detected by the UDPHS controller. This triggers a UDPHS interrupt
when the ENDRESET bit is set in UDPHS_IEN.
31 30 29 28 27 26 25 24
DMA_6 DMA_5 DMA_4 DMA_3 DMA_2 DMA_1
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
EPT_6 EPT_5 EPT_4 EPT_3 EPT_2 EPT_1 EPT_0
76543210
UPSTR_RES ENDOFRSM WAKE_UP ENDRESET INT_SOF MICRO_SOF DET_SUSPD SPEED