Datasheet

1157
SAM9G45 [DATASHEET]
Atmel-6438O-ATARM-SAM9G45-Datasheet_08-Dec-15
45. Electrical Characteristics
45.1 Absolute Maximum Ratings
45.2 DC Characteristics
The following characteristics are applicable to the operating temperature range: T
A
= -40°C to +85°C, unless otherwise
specified.
Table 45-1. Absolute Maximum Ratings*
Operating Temperature (Industrial)...............-40°C to + 85°C
*NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of
the device at these or other conditions beyond those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reli-
ability.
Junction Temperature..................................................125°C
Storage Temperature..................................-60°C to + 150°C
Voltage on Input Pins
with Respect to Ground......-0.3V to VDDIO+0.3V(+ 4V max)
Maximum Operating Voltage
(VDDCORE, VDDPLLA, VDDUTMIC, VDDPLLUTMI)....1.2V
(VDDIOM0).....................................................................2.0V
(VDDIOM1, VDDIOPx, VDDUTMII, VDDOSC,
VDDANA and VDDBU).................................................. 4.0V
Total DC Output Current on all I/O lines....................350 mA
Table 45-2. DC Characteristics
Symbol Parameter Conditions Min Typ Max Unit
V
DDCORE
DC Supply Core – 0.9 1.0 1.1 V
V
DDCORErip
VDDCORE ripple – – – 20 mVrms
V
DDUTMIC
DC Supply UDPHS and
UHPHS UTMI+ Core
– 0.9 1.0 1.1 V
V
DDUTMII
DC Supply UDPHS and
UHPHS UTMI+ Interface
– 3.0 3.3 3.6 V
V
DDBU
DC Supply Backup – 1.8 – 3.6 V
V
DDBUrip
VDDBU ripple – – – 30 mVrms
V
DDPLLA
DC Supply PLLA – 0.9 1.0 1.1 V
V
DDPLLArip
VDDPLLA ripple – – – 10 mVrms
V
DDPLLUTMI
DC Supply PLLUTMI – 0.9 1.0 1.1 V
V
DDPLLUTMIrip
VDDPLLUTMI ripple – – – 10 mVrms
V
DDOSC
DC Supply Oscillator – 1.65 – 3.6 V
V
DDOSCrip
VDDOSC ripple – – – 30 mVrms
V
DDIOM0
DC Supply DDR I/Os – 1.65 1.8 1.95 V
V
DDIOM1
DC Supply EBI I/Os – 1.65/3.0 1.8/3.3 1.95/3.6 V
V
DDIOP0
DC Supply Peripheral I/Os – 1.65 – 3.6 V