Datasheet

1019
SAM9G45 [DATASHEET]
Atmel-6438O-ATARM-SAM9G45-Datasheet_08-Dec-15
40.7.18 DMAC Channel x [x = 0..7] Configuration Register
Name: DMAC_CFGx [x = 0..7]
Address: 0xFFFFEC50 [0], 0xFFFFEC78 [1], 0xFFFFECA0 [2], 0xFFFFECC8 [3], 0xFFFFECF0 [4], 0xFFFFED18 [5],
0xFFFFED40 [6], 0xFFFFED68 [7]
Access: Read/Write
•SRC_PER
Channel x Source Request is associated with peripheral identifier coded SRC_PER handshaking interface.
• DST_PER
Channel x Destination Request is associated with peripheral identifier coded DST_PER handshaking interface.
•SRC_REP
0: When automatic mode is activated, source address is contiguous between two buffers.
1: When automatic mode is activated, the source address and the control register are reloaded from previous transfer.
• SRC_H2SEL
0: Software handshaking interface is used to trigger a transfer request.
1: Hardware handshaking interface is used to trigger a transfer request.
•DST_REP
0: When automatic mode is activated, destination address is contiguous between two buffers.
1: When automatic mode is activated, the destination and the control register are reloaded from the previous transfer.
• DST_H2SEL
0: Software handshaking interface is used to trigger a transfer request.
1: Hardware handshaking interface is used to trigger a transfer request.
•SOD
0: STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.
1: STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.
• LOCK_IF
0: Interface Lock capability is disabled
1: Interface Lock capability is enabled
31 30 29 28 27 26 25 24
– – FIFOCFG – AHB_PROT
23 22 21 20 19 18 17 16
– LOCK_IF_L LOCK_B LOCK_IF – – – SOD
15 14 13 12 11 10 9 8
– – DST_H2SEL DST_REP – – SRC_H2SEL SRC_REP
76543210
DST_PER SRC_PER