Datasheet

 2017 Microchip Technology Inc. DS60001516A-page 509
SAM9G20
32.8 Syncrhronous Serial Controller (SSC) User Interface
Table 32-3: Register Mapping
Offset Register Name Access Reset
0x0 Control Register SSC_CR Write –
0x4 Clock Mode Register SSC_CMR Read/Write 0x0
0x8 Reserved – – –
0xC Reserved – – –
0x10 Receive Clock Mode Register SSC_RCMR Read/Write 0x0
0x14 Receive Frame Mode Register SSC_RFMR Read/Write 0x0
0x18 Transmit Clock Mode Register SSC_TCMR Read/Write 0x0
0x1C Transmit Frame Mode Register SSC_TFMR Read/Write 0x0
0x20 Receive Holding Register SSC_RHR Read 0x0
0x24 Transmit Holding Register SSC_THR Write –
0x28 Reserved – – –
0x2C Reserved – – –
0x30 Receive Sync. Holding Register SSC_RSHR Read 0x0
0x34 Transmit Sync. Holding Register SSC_TSHR Read/Write 0x0
0x38 Receive Compare 0 Register SSC_RC0R Read/Write 0x0
0x3C Receive Compare 1 Register SSC_RC1R Read/Write 0x0
0x40 Status Register SSC_SR Read 0x000000CC
0x44 Interrupt Enable Register SSC_IER Write –
0x48 Interrupt Disable Register SSC_IDR Write –
0x4C Interrupt Mask Register SSC_IMR Read 0x0
0x50–0xFC Reserved – – –
0x100–0x124 Reserved for Peripheral Data Controller (PDC) – – –