Datasheet

SAM9G20
DS60001516A-page 356  2017 Microchip Technology Inc.
Note 1: Reset value of PIO_PSR depends on the product implementation.
2: PIO_ODSR is Read-only or Read/Write depending on PIO_OWSR I/O lines.
3: Reset value of PIO_PDSR depends on the level of the I/O lines. Reading the I/O line levels requires the clock of the PIO Con-
troller to be enabled, otherwise PIO_PDSR reads the levels present on the I/O line at the time the clock was disabled.
4: PIO_ISR is reset at 0x0. However, the first read of the register may read a different value as input changes may have occurred.
5: Only this set of registers clears the status by writing 1 in the first register and sets the status by writing 1 in the second register.
0x007C
to
0x009C
Reserved
0x00A0 Output Write Enable PIO_OWER Write-only –
0x00A4 Output Write Disable PIO_OWDR Write-only –
0x00A8 Output Write Status Register PIO_OWSR Read-only 0x00000000
0x00AC Reserved
Table 28-2: Register Mapping (Continued)
Offset Register Name Access Reset