Datasheet

SAM9G20
DS60001516A-page 280  2017 Microchip Technology Inc.
25.9.4 PMC Peripheral Clock Enable Register
Name:PMC_PCER
Access:Write-only
PIDx: Peripheral Clock x Enable
0: No effect.
1: Enables the corresponding peripheral clock.
Note: PID2 to PID31 refer to identifiers as defined in Section 9.2 “Peripheral Identifiers”.
Note: Programming the control bits of the Peripheral ID that are not implemented has no effect on the behavior of the PMC.
31 30 29 28 27 26 25 24
PID31 PID30 PID29 PID28 PID27 PID26 PID25 PID24
23 22 21 20 19 18 17 16
PID23 PID22 PID21 PID20 PID19 PID18 PID17 PID16
15 14 13 12 11 10 9 8
PID15 PID14 PID13 PID12 PID11 PID10 PID9 PID8
76543210
PID7 PID6 PID5 PID4 PID3 PID2 – –