Datasheet

SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
790
The sequence above shows the beginning of an Ethernet frame. Byte order of transmission is from top to bottom
as shown. For a successful match to specific address 1, the following address matching registers must be set up:
 Base address + 0x98 0x87654321 (Bottom)
 Base address + 0x9C 0x0000CBA9 (Top)
And for a successful match to the Type ID register, the following should be set up:
 Base address + 0xB8 0x00004321
40.4.6 Broadcast Address
The broadcast address of 0xFFFFFFFFFFFF is recognized if the ‘no broadcast’ bit in the network configuration
register is zero.
40.4.7 Hash Addressing
The hash address register is 64 bits long and takes up two locations in the memory map. The least significant bits
are stored in hash register bottom and the most significant bits in hash register top.
The unicast hash enable and the multicast hash enable bits in the network configuration register enable the
reception of hash matched frames. The destination address is reduced to a 6-bit index into the 64-bit hash register
using the following hash function. The hash function is an exclusive or of every sixth bit of the destination address.
hash_index[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
hash_index[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
hash_index[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
hash_index[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
hash_index[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
hash_index[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
da[0] represents the least significant bit of the first byte received, that is, the multicast/unicast indicator, and
da[47] represents the most significant bit of the last byte received.
If the hash index points to a bit that is set in the hash register, then the frame is matched according to whether the
frame is multicast or unicast.
A multicast match is signalled if the multicast hash enable bit is set. da[0] is 1 and the hash index points to a bit set
in the hash register.
A unicast match is signalled if the unicast hash enable bit is set. da[0] is 0 and the hash index points to a bit set in
the hash register.
To receive all multicast frames, the hash register should be set with all ones and the multicast hash enable bit
should be set in the network configuration register.
40.4.8 Copy All Frames (or Promiscuous Mode)
If the copy all frames bit is set in the network configuration register, then all non-errored frames are copied to
memory. For example, frames that are too long, too short, or have FCS errors or rx_er asserted during reception
are discarded and all others are received. Frames with FCS errors are copied to memory if bit 19 in the network
configuration register is set.