Datasheet

SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
570
Figure 34-14. Transmit Frame Format in Continuous Mode
Note: 1. STTDLY is set to 0. In this example, SSC_THR is loaded twice. FSDEN value has no effect on the transmission.
SyncData cannot be output in continuous mode.
Figure 34-15. Receive Frame Format in Continuous Mode
Note: 1. STTDLY is set to 0.
34.6.8 Loop Mode
The receiver can be programmed to receive transmissions from the transmitter. This is done by setting the Loop
Mode (LOOP) bit in SSC_RFMR. In this case, RD is connected to TD, RF is connected to TF and RK is connected
to TK.
DATLEN
Data
DATLEN
Data
Default
Start
From SSC_THR From SSC_THR
TD
Start: 1. TXEMPTY set to 1
2. Write into the SSC_THR
Data
DATLEN
Data
DATLEN
Start = Enable Receiver
To SSC_RHR
To SSC_RHR
RD