Datasheet

559
SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
34. Synchronous Serial Controller (SSC)
34.1 Overview
The Atmel Synchronous Serial Controller (SSC) provides a synchronous communication link with external devices.
It supports many serial synchronous communication protocols generally used in audio and telecom applications
such as I2S, Short Frame Sync, Long Frame Sync, etc.
The SSC contains an independent receiver and transmitter and a common clock divider. The receiver and the
transmitter each interface with three signals: the TD/RD signal for data, the TK/RK signal for the clock and the
TF/RF signal for the Frame Sync. The transfers can be programmed to start automatically or on different events
detected on the Frame Sync signal.
The SSC’s high-level of programmability and its two dedicated PDC channels of up to 32 bits permit a continuous
high bit rate data transfer without processor intervention.
Featuring connection to two PDC channels, the SSC permits interfacing with low processor overhead to the
following:
 CODECs in master or slave mode
 DAC through dedicated serial interface, particularly I2S
 Magnetic card reader
34.2 Block Diagram
Figure 34-1. Block Diagram
SSC Interface
PIO
PDC
APB Bridge
MCK
System
Bus
Peripheral
Bus
TF
TK
TD
RF
RK
RD
Interrupt Control
SSC Interrupt
PMC