Datasheet

35
SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
9. Peripherals
9.1 User Interface
The peripherals are mapped in the upper 256 Mbytes of the address space between the addresses 0xFFFA 0000
and 0xFFFC FFFF. Each User Peripheral is allocated 16 Kbytes of address space.
A complete memory map is presented in Figure 7-1 on page 24.
9.2 Peripheral Identifiers
Table 9-1 defines the Peripheral Identifiers. A peripheral identifier is required for the control of the peripheral
interrupt with the Advanced Interrupt Controller and for the control of the peripheral clock with the Power
Management Controller.
Table 9-1. SAM9263 Peripheral Identifiers
Peripheral ID Peripheral Mnemonic Peripheral Name External Interrupt
0 AIC Advanced Interrupt Controller FIQ
1 SYSC System Controller Peripherals
2 PIOA Parallel I/O Controller A
3 PIOB Parallel I/O Controller B
4 PIOC to PIOE Parallel I/O Controller C, D and E
5 Reserved
6 Reserved
7 US0 USART 0
8 US1 USART 1
9 US2 USART 2
10 MCI0 Multimedia Card Interface 0
11 MCI1 Multimedia Card Interface 1
12 CAN CAN Controller
13 TWI Two-Wire Interface
14 SPI0 Serial Peripheral Interface 0
15 SPI1 Serial Peripheral Interface 1
16 SSC0 Synchronous Serial Controller 0
17 SSC1 Synchronous Serial Controller 1
18 AC97C AC97 Controller
19 TC0, TC1, TC2 Timer/Counter 0, 1 and 2
20 PWM Pulse Width Modulation Controller
21 EMAC Ethernet MAC
22 Reserved
23 2DGE 2D Graphic Engine
24 UDP USB Device Port
25 ISI Image Sensor Interface