Datasheet

SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
1078
Revision
6249G Comments
Change
Request
Ref.
Overview:
Section “Features”
Debug Unit (DBGU) updated.
Section 9.4.3 “EBI1”, updated
Section 9.4.4 “Ethernet 10/100MAC”, added to datasheet
Section 5.5 “Shutdown Logic Pins”, updated, “SHDN pin is tri state output.......”
5846
5903
rfo
BootProgram:
Section 12.5 “SD Card Boot” Boot ROM does not support high capacity SDCards, added to datasheet
Section 12.8 “Hardware and Software Constraints”, added footnote
(1)
Boot ROM does not support high
capacity SDCards.
5935
DBGU
Section 30.1 ”Overview”added text: “The Debug Unit two-pin UART can be used stand-alone for general
purpose serial communication.”
5846
SMC:
“Programmable IO Delays” removed from datasheet 5926
USART:
Manchester Encoding/Decoding is available in this product
5929
Errata:
Section 50.1 ”AT91SAM9263 Errata - Revision “A” Parts”
Section 50.1.1.1 ”Main Oscillator: Spurious Malfunction of Main Oscillator”, added to errata.
Section 50.1.15.9 ”SPI: Software Reset Must be Written Twice”, added to errata.
Section 50.1 “SAM9263 Errata - Revision “B” Parts”
Section 50.1.1.1 “Main Oscillator: Spurious Malfunction of Main Oscillator”, added to errata.
Section 50.1.14.8 “SPI: Software Reset Must be Written Twice”, added to errata.
5960
5957
5960
5957
Section 50.1 ”AT91SAM9263 Errata - Revision “A” Parts”
Section 50.1.6.3 ”CAN: Contents of Mailbox 0 can be sent Even if Mailbox is Disabled”
Section 50.1 “SAM9263 Errata - Revision “B” Parts”
Section 50.1.5.3 “CAN: Contents of Mailbox 0 can be sent Even if Mailbox is Disabled”
6048
Section 50.1 “SAM9263 Errata - Revision “B” Parts”
Section 50.1.11 “Reset Controller (RSTC)”, and
Section 50.1.11.1 “RSTC: ERSTL Default Value is 1” added to errata
5882
Electrical Characteristics:
Section 46.4 “Core Power Supply POR Characteristics”, added to datasheet. 6042