Datasheet

SAM9263 [DATASHEET]
Atmel-6249N-ATARM-SAM9263-Datasheet_14-Mar-16
1006
• FRATE: Frame rate [0..7]
0: All the frames are captured, else one frame every FRATE+1 is captured.
• FULL: Full mode is allowed
1: Both codec and preview datapaths are working simultaneously
• THMASK: Threshold mask
0: 4, 8 and 16 AHB bursts are allowed
1: 8 and 16 AHB bursts are allowed
2: Only 16 AHB bursts are allowed
• CODEC_ON: Enable the codec path enable bit
Write-only.
0: The codec path is disabled
1: The codec path is enabled and the next frame is captured. Refer to bit CDC_PND in “ISI Status Register” on page 1009.
• SLD: Start of Line Delay
SLD pixel clock periods to wait before the beginning of a line.
• SFD: Start of Frame Delay
SFD lines are skipped at the beginning of the frame.