Datasheet

SAM9261 [DATASHEET]
Atmel-6062O-ATARM-SAM9261-Datasheet_21-Jun-16
732
Revision History:
Doc. Rev., ”6062H”, Change Request Ref.,”4241”, removed : “PA30 - PA31 power supplies are
VDDIOM.”
5333
Doc. Rev.
6062J
Date
20-Mar-08 Comments
Change
Request
Ref.
Section 30. ”Two-wire Interface (TWI)” important update to this section 5327
Table 3-1 on page 9, PC16 is powered by VDDIOM in Pinout for LFBA package 5382
Table 38-8 “32 kHz Oscillator Characteristics” VDDOSC changed to VDDBU 5334/5440
Section 12.11 “Hardware and Software Constraints”, ....”.downloaded code size must be
smaller than 156 Kbytes”. ....”time to down load 156 Kbytes is reduced to 200 ms.”
5397
Removed Section 41.3 “AT91SAM9261 Errata-Revision B Parts”. 5464
Doc. Rev.
6062I
Date
06-Feb-08 Comments
Change
Request
Ref.
”Errata”, added Section 41.3 ”AT91SAM9261 Errata - Revision B Parts”
Section 42.1.5 “LCD” added to Section 42.1 “SAM9261 Errata - Revision A Parts”
Section 42.1.12 “Shutdown Controller (SHDWC)” added to errata.
5167
rfo review
5263
Section 4.1 “Power Supplies”, startup voltage slope requirements for VDDCORE and VDDBU
removed.
5228
Section 39.7 ”Core Power Supply POR Characteristics” added to Electrical Characteristics
subsequent chapter, table and figure numbering advanced.
5250
Table 38-2 “DC Characteristics” VIH updated.
VOL and VOH updated
4928
5287
Section 38.9 ”Peripheral Timings” In the SPI section. figure titles updated as follows.
Figure 38-7 ”SPI Master Mode with (CPOL =0 and NCPHA = 1) or (CPOL =1 NCPHA = 0)”
Figure 38-8 ”SPI Master Mode with (CPOL = NCPHA = 0) or (CPOL = NCPHA = 1)”
5259
Features: “Package” on page 3, updated, 3.0V to 3.6V for VDDOSC and for VDDPLL. 5248
Doc. Rev.
6062K
Date
27-Aug-08 Comments (Continued)
Change
Request
Ref.