Datasheet

775
32117D–AVR-01/12
AT32UC3C
Note: The reset values for these registers are device specific. Please refer to the Module Configuration section at the end of this
chapter.
0x24 Interrupt Mask Register CANIMR Read-only 0x00000000
0x28 Interrupt Status Clear Register CANISCR Write-only 0x00200000
0x2C Interrupt Status Register CANISR Read-only 0x00200000
0x30 MOb Search Register MOBSCH Read-only 0x00202020
0x34 MOb Enable Register MOBER Write-only 0x00000000
0x38 MOb Disable Register MOBDR Write-only 0x00000000
0x3C MOb Enable Status Register MOBESR Read-only 0x00000000
0x40 MOb Interrupt Enable Register MOBIER Write-only 0x00000000
0x44 MOb Interrupt Disable Register MOBIDR Write-only 0x00000000
0x48 MOb Interrupt Mask Register MOBIMR Read-only 0x00000000
0x4C MOb RX Interrupt Status Clear Register MRXISCR Write-only 0x00000000
0x50 MOb RX Interrupt Status Register MRXISR Read-only 0x00000000
0x54 MOb TX Interrupt Status Clear Register MTXISCR Write-only 0x00000000
0x58 MOb TX Interrupt Status Register MTXISR Read-only 0x00000000
0x5C MOb Control Register MOBCTRL Read/Write 0x00000000
0x60 MOb Status Clear Register MOBSCR Write-only 0x00000000
0x64 MOb Status Register MOBSR Read-only 0x00000000
Table 29-4. CANIF Register Memory Map