Datasheet

655
32117D–AVR-01/12
AT32UC3C
25.8 Module Configuration
The specific configuration for each USART instance is listed in the following tables. The module
bus clocks listed here are connected to the system bus clocks according to the table in the Sys-
tem Bus Clock Connections section.
25.8.1 Clock Connections
Each USART can be connected to an internally divided clock:
Table 25-26. Module Configuration
Feature
USART0
USART2
USART3
USART4 USART1
ISO7816 Not Implemented Implemented
IRDA Logic Not Implemented Implemented
RS485 Logic Not Implemented Implemented
Modem Logic Not Implemented Implemented
SPI Logic Implemented Implemented
LIN Logic Implemented Implemented
Manchester Logic Not Implemented Implemented
Fractional Baudrate Implemented Implemented
DIV value for divided CLK_USART 8 8
Receiver Time-out Counter Size
(Size of the RTOR.TO field)
17-bits 17-bits
Table 25-27. Module Clock Name
Module name Clock name Description
USART0 CLK_USART0 Peripheral Bus clock from the PBA clock domain
USART1 CLK_USART1 Peripheral Bus clock from the PBC clock domain
USART2 CLK_USART2 Peripheral Bus clock from the PBA clock domain
USART3 CLK_USART3 Peripheral Bus clock from the PBA clock domain
USART4 CLK_USART4 Peripheral Bus clock from the PBC clock domain
Table 25-28. USART Clock Connections
USART Source Name Connection
0
Internal CLK_DIV
PBA Clock / 8 (CLK_PBA_USART_DIV)
1 PBC Clock / 8 (CLK_PBC_USART_DIV)
2 PBA Clock / 8 (CLK_PBA_USART_DIV)
3 PBA Clock / 8 (CLK_PBA_USART_DIV)
4 PBC Clock / 8 (CLK_PBC_USART_DIV)