Datasheet

1122
32117D–AVR-01/12
AT32UC3C
1: The free running mode is enabled, sequencer 0 performs conversions continuously.
0: The free running modeis disabled.
note: once in this mode, sequencer 1 requests cannot be serviced.
• SSMQ: Single Sequencer Mode
1: The single sequencer mode is enabled, sequencers 0 and 1 are merged, increasing the number of conversions per
sequence.
0: The single sequencer mode is disabled, SEQ0 and SEQ1 are in simultaneous mode.
• SLEEP: Sleep Mode Selection
1: The power saving mode is enabled. The analog ADC block is powered off after each conversion.
0: The power saving mode is disabled.
note: when enabled, start-up time is required before each new conversion.
• ADCEN: ADC Enable
1: The ADC controller is enabled, the analog ADC block is powered-on according to SLEEP mode.
0: The ADC controller is disabled, the analog ADC block is powered-off.