Datasheet

Features
Fast read access time – 45ns
Low-power CMOS operation
100µA max standby
25mA max active at 5MHz
JEDEC standard packages
32-lead PDIP
32-lead PLCC
5V ±10% supply
High-reliability CMOS technology
2000V ESD protection
200mA latchup immunity
Rapid programming algorithm – 100 µs/byte (typical)
CMOS- and TTL-compatible inputs and outputs
Integrated product identification code
Industrial temperature range
Green (Pb/halide-free) packaging option
1. Description
The Atmel
®
AT27C010 is a low-power, high-performance 1,048,576-bit, one-time pro-
grammable, read-only memory (OTP EPROM) organized as 128K by 8 bits. Thedevice
requires only one 5V power supply in normal read mode operation. Any byte can be
accessed in less than 45ns, eliminating the need for speed reducing WAIT states on high-
performance microprocessor systems.
In read mode, the AT27C010 typically consumes only 8mA. Standby mode supply current
is typically less than 10µA.
The AT27C010 is available in a choice of industry standard, JEDEC approved, one-time pro-
grammable (OTP) PDIP and PLCC packages. All devices feature two-line control (CE, OE)
to give designers the flexibility to prevent bus contention.
With 128K byte storage capability, the AT27C010 allows firmware to be stored reliably and
to be accessed by the system without the delays of mass storage media.
The AT27C010 has additional features to ensure high quality and efficient production use.
The rapid programming algorithm reduces the time required to program the part and guar-
antees reliable programming. Programming time is typically only 100 µs/byte. The
integrated product identification code electronically identifies the device and manufacturer.
This feature is used by industry standard programming equipment to select the proper pro-
gramming algorithms and voltages.
1Mb (128K x 8)
One-time
Programmable,
Read-only Memory
Atmel AT27C010
0321N–EPROM–4/11

Summary of content (13 pages)