Datasheet

CAN Bus Analyzer User’s Guide
DS51848B-page 28  2011 Microchip Technology Inc.
4.10.x Enter DLC within the following range
(0-8)
Enter a valid DLC into the text field. The tool is
expecting a value in the range of “0-8”.
4.20.x Enter DATA within the following range
(0-FF)
Enter valid Data into the text field. The tool is expecting
a hexidecimal value in the range of “0-FF”.
4.25.x Enter DATA within the following range
(0-255)
Enter valid Data into the text field. The tool is expecting
a decimal value in the range of “0-255”.
4.30.x Enter a valid PERIOD within the
following range (100-5000)\nOr (0) for
a one shot message
Enter a valid Period into the text field. The tool is
expecting a decimal value in the range of “0 or
100-5000”.
4.40.x Enter a valid REPEAT within the
following range (1-99)\nOr (0) for a
one shot message
Enter a valid Repeat into the text field. The tool is
expecting a decimal value in the range of “0-99”.
4.70.x Unknown error caused by user input Check that the text field only has no special characters
or spaces.
4.75.x Required input for CAN Message is
empty
Check that the ID, DLC, DATA, PERIOD, and REPEAT
fields contain valid data.
5.00.x Reserved for Message Received
Errors
Reserved for Message Received errors.
6.00.x Unable to Log Data Tool is unable to write CAN traffic to Log File. Possible
cause may be that the drive is either full, write
protected, or does not exist.
Error
Number
Error Possible Solution