Datasheet

Device state VDDIO CHIP_EN RESETN Output
driver
Input
driver
Pull up/down
resistor (96kΩ)
On Sleep/
On Transmit/
On Receive:
core supply on, device
programmed by firmware
High High High Programmed by
firmware for
each pin:
Enabled or
Disabled
Opposite
of Output
Driver
state
Programmed by
firmware for
each pin:
Enabled or
Disabled
8.6 Module Reset
If a module reset is performed, the RESETN pin must be pulsed low for a minimum of 1µ second.
ATWINC15x0
Power Consumption
© 2018 Microchip Technology Inc.
Datasheet
DS70005304C-page 26