Datasheet

Important: UART2 supports RTS and CTS flow control. The UART RTS and UART CTS
MUST be connected to the host MCU UART and enabled for the UART interface to be
functional.
Figure 7-4. Example of UART RX of TX Packet
Previous
Packets or
Leading
Idle Bits
Current Packet
Data
Start
Bit
Parity
Bit
Stop Bits
Next
Packet
ATWINC15x0
External Interfaces
© 2018 Microchip Technology Inc.
Datasheet
DS70005304C-page 22