Datasheet

1.1.4.2 Battery Charging
A lithium battery can be charged up using USB power. Perform the following steps to charge the battery:
1. Short the Jumper J6, as shown in the following image:
2. Short the Jumper J4.
3. Connect the lithium battery to connector BAT1.
4. Plug in USB power to micro-USB port (J1).
LD1 color indicates the battery charging status, when LD1 is yellow, remove the USB power. The
indication is shown in the following table.
Table 1-1. LD1 Indication
LD1 color Charging Status
Red Standby
Magenta Charging is in-progress
Yellow Charging is complete
ATWINC15x0 Smart Device Kit
Overview
© 2019 Microchip Technology Inc.
User Guide
DS50002880A-page 8