Datasheet

addition to the voice control, the user can also control the board LED LD2 either on the Alexa mobile

application or on the Wi-Fi Smart Device Enablement Kit Mobile application (see 2.1.3 Control the

Board).

Figure 2-4. Microchip Wi-Fi Smart Device Smart Home Skill

Table 2-2. Function List

Function Voice Command

Turn On/Off LED LD2 Turn on/off <DEVICE_NAME>

Adjust light intensity of LED LD2 Set the power to [0 - 100]% on <DEVICE_NAME>

2.3.1 Set up Alexa on Amazon Echo Dot

Perform the following steps to set up Alexa on Amazon Echo Dot.

1. Install the Alexa mobile application (Android devices or iOS devices).

2. Create an Alexa account and sign in to the Alexa mobile application.

3. Refer to the link below to set up Echo Dot:

https://www.amazon.com/gp/help/customer/display.html?nodeId=201994280

2.3.2 Enable Microchip Wi-Fi Smart Device Smart Home Skill

Perform the following steps to enable Microchip Wi-Fi Smart Device Smart Home Skill.

1. Launch Alexa mobile application, and tap ”≡” in the upper left hand corner.

2. Select Skills.

3. Type “Microchip wi-fi smart device” in the search bar, and tap Microchip Wi-Fi Smart Device

Smart Home Skill.

ATWINC15x0 Smart Device Kit

Getting Started

User Guide

DS50002880A-page 29